Standard Poles

Standard Poles


INGAL EPS Standard Poles are the lightest poles available across the full range of length and tip loads. All of the standard range conforms to AS/NZS standards and ASCE/SEI 48-11. The length and tip loads of the standard range allow INGAL EPS steel poles to be a direct replacement for most timber and concrete poles, with the addition of some significant advantages.

Our standard range of in-ground and base plate mounted poles come with the offer of PLS Pole data to give asset owners and consultants real-time checking of our structures at the desktop.

Key Benefits

Lightest poles across the full range of length and tip loads
Conform to all relevant AS/NZS standards
Conform to ASCE/SEI 48-11
Impervious to insects and rot
Non-combustible with proven bush fire performance
Tapered design enables self-cleaning during rainfall
Fully recyclable
Self-bonding
PLS Pole data available

Standard Features

In-Ground Mounted

12-sided pole shaft
Welded top cap
Mounting holes (to your specification if required)
Identification plate
M12 earth point 250mm above the nominal ground line
M24 nut 250mm above the nominal ground line (to assist lifting)
Additional in-ground corrosion protection 200mm above to 400mm below the nominal ground line
Anti-sink straps
Hot dip galvanised finish

Base Plate Mounted

12-sided pole shaft (40kN to 80kN)
16-sided pole shaft (100kN & 120kN)
Welded top cap
Mounting holes (to your specification if required)
Identification plate
M12 earth point 250mm above the pole base
Two lifting gussets on the base plate
Anchor bolts, templates, nuts & washers
Hot dip galvanised finish